Silos and feed conveying systems

This category covers poultry farm silos and feed conveying systems, from storage into the house. Feed is stored in the silo, carried by the auger conveying line to the house hopper, and from there enters the feeder lines. If feed is prepared on the farm, a grinder, mixer and elevator are added to this chain. The three products in this category are these three links.

Products in this category

  • Feed storage silo: a bolted silo of corrugated galvanised sheet, standard capacity 2.5 to 30 tonnes and custom capacity up to 100 tonnes, on 4 to 10 tubular legs. It has a caged ladder, an inspection window and a lever for opening the top hatch from the ground. Assembly and disassembly are simple.
  • Feed conveying system: a conveying line with a steel spring auger inside a wear-resistant tube that carries feed from the silo to the house hoppers. A capacitive sensor at the end of the line stops it when the hopper is full.
  • Grinder, mixer and elevator: an on-farm feed preparation set with a hammer or roller mill, a vertical or horizontal mixer and a screw elevator, in capacities of 1, 2, 3, 4 and 5 tonnes per hour.

Selection criteria

The silo size and conveying line length follow from the house feed consumption and the interval between feed deliveries. For an estimate, the specialist needs this information:

  • Number of houses and the capacity of each house per cycle
  • Rearing type: broiler, layer or breeder
  • Distance from the silo site to the house and where the line enters the house
  • Whether feed is bought ready-made or prepared on the farm
  • Ground conditions at the silo site and access for the feed truck
  • Power available for the conveying line motor and, if needed, the grinder and mixer

The conveying line must be matched to the feeding system inside the house. For feeder pans and lines, see the feeder pans category. For a complete house design, see the poultry house fit-out and renovation page.

Technical inquiry

Send the number and capacity of the houses and the silo-to-house distance through the contact form, and a specialist will review the silo size and conveying line route.

Silos and feed conveying systems products (3 items)

  • Feed Conveying System: Feed Transfer Line — Fully mechanised feed transfer line with wear-resistant pipes and a helical auger spring, plus capacitive cut-off sensors, for…
  • Poultry Farm Mill, Mixer and Elevator — Feed production line comprising a hammer/roller mill with a three-phase Gen motor, a vertical/horizontal homogenising mixer and a…
  • Silos and feed conveying — Bolted corrugated galvanised feed storage silos in capacities of 2.5 to 30 tonnes (custom-built up to 100 tonnes),…

Technical inquiry · PDF catalogue